FPT DINOMAX 1 HIGH-SPEED 5-AXIS GANTRY MILLING MACHINE

CNC Heidenhain iTNC 530 S.P

WORKING RANGE:
Longitudinal X-axis travel: 4,000 mm
Transverse Y-axis travel: 2,200 mm
Vertical Z-axis travel: 1,100 mm
Maximum speed with interpolating axes: 50 m/min

WORKING SURFACE:
Dimensions: 4,000 x 2,000 mm
Height: 300 mm
Load capacity: 15 T/m²
T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling feet. Direction of T-slots parallel to the X-axis movement.

AXIS SPECIFICATIONS:
Axis feed rate: 50,000 mm/min
Acceleration: 4 m/sec²

WORKING AREA:
Maximum horizontal clearance: 3,200 mm
Maximum vertical clearance under the crossbeam: 1,926 mm
Height of the work surface from the ground: 330 mm

UNIVERSAL HEAD WITH CONTINUOUS POSITIONING AND ELECTRIC SPINDLE HOLDER Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct-drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for a 10° undercut. Internal cooling system for bearings and axis motors.
B-axis rotation range: +/- 185°
A-axis rotation range: +/- 185°
Maximum axis rotation speed: 30 rpm
Maximum torque available during A/C axis operation: 450 Nm
Axis clamping torque: 1,400 Nm
Power available at the spindle (S1/S6): 22/33 kW
Torque available at the spindle (S1/S6): 84/128 Nm
Maximum spindle speed: 22,000 rpm
Tool holder: HSK – A63 DIN 69893
The head is supplied complete with a cradle for handling and storage. The cradle is used outside the effective working area and therefore does not reduce the machine’s actual capabilities.

30-POSITION HSK CHAIN TOOL MAGAZINE:
Automatic 30-position chain tool changer mounted on the rear of the work area, fully protected from dust and chips.
Tool type: HSK-A63 DIN 69893
Max. tool diameter with adjacent slots occupied: 90 mm
Max. tool length: 300 mm
Max. tool weight: 10 kg

PRESSURIZATION OF MEASURING LINES:
Pneumatic system complete with a control unit for pressurizing the measuring lines.

SPRAY-MIST TOOL LUBRICANT-COOLANT:
Mist lubrication and cooling system. The mist is produced by mixing air and oil. It is controlled via the M function. Using the spray-mist improves cut quality, prevents the buildup of swarf, keeps the cutting area clean, and acts as a coolant.
Extremely useful for improving surface finish quality.

EXTERNAL TOOL COOLING:
Coolant distribution system, controlled by the CNC with nozzles arranged on the flange around the spindle, complete with a 1,200-liter tank for collection and filtration.
Flow rate: 30 l/min, pressure: 4 bar.

REQUIRED CONNECTIONS:
Maximum installed power: 150 kW
Maximum current required: 235 A